Learn How to Kill a Tree

Trees are very crucial, actually, they areMaterials Necessary:
necessary for our very survival. Their presenceKosher saltssand
on our planet helps to give the conditions to makeTools Necessary:
life better. They have many uses:Drill with ½ inch bit
1. They produce oxygen.Instructions:
2. They clean the soil by removing dangerous1. Use the drill to bore holes around the trunk right
elements.above the roots approximately 2 feet apart.
3. They absorb noise pollution.2. Fill the holes with kosher salts.
4. They take in carbon dioxide from the3. Cover the bottom of the tree with sand. It will
atmosphere.suffocate and eventually die.
5. They free the atmosphere of air impurities.#3 - Using Nitrogen Fertilizer
6. They supply shade and cool the surroundings.Necessary Materials:
7. Trees prevent soil erosion.Nitrogen Fertilizer
Because of these crucial functions that treesNecessary Tools:
perform, it is very hard to kill them, butDrill with ½ inch bit
sometimes it is required to do so. No one in theirInstructions:
senses would wish to kill a tree for no justifiable1. Use your drill to make holes around the trunk
motive. There are different situations where itabout 2 feet apart.
becomes compulsory eliminate it. When it2. Fill the holes with nitrogen fertilizer. It will grow
becomes injured by hurricane or infested byfungus and decompose the wood in about 4-6
beetles or bugs, the best thing to do is kill. If itweeks based on the size.
presents a hazard to the environment, it isTip:
compulsory to kill. If the tree is in an area that willFor this technique to work effectively, it must be
be used for building a building, it needs to be killed.kept moist.
Means to Kill a Tree#4 - Using Sodium Chloride
#1 - Cutting it down with a Chainsaw.Materials Required:
Materials Required:Sodium chloride
GlovesWater
Hearing protectionContainer
Safety glassesDirections:
Tools Required:1. Combine 1 part of sodium chloride with 2 parts
Chainsawof water.
Instructions:2. Pour the solution around the trunk.
1. Clothe yourself with defensive gears. These areTips and Warnings:
safety goggles to guard your eyes, hearingFor this procedure to kill a tree effectively, it has
protection to lessen the loud noise and gloves toto be replicated 3 or 4 times. It will die in
shield the hands.approximately 4-6 weeks depending on its size.
2. Decide on the secure and ideal course to dropThe mixture may cause a hazard to surrounding
the tree in. Then start the chain saw and place itvegetation.
on a section.#5 - Using Roundup Weed-Killer
3. Apply pressure on the saw and cut a notch intoRequired Materials:
the trunk. Continue cutting downward about 1/3Roundup weed killer
through the trunk.Necessary Tool:
4. Make another cut upward to meet the first cut.Funnel
Remove the notch.Drill with ½ inch bit
5. Cut on the other side to make a hinge toInstructions:
control the falling.1. Using a drill, drill numerous holes around the
6. Stop the chainsaw when the tree starts to falltrunk in a vertical angle.
and move away from the path where it is going2. Pour the roundup weed killer into the holes by
to drop. You can then cut it up into smaller partsusing the funnel. Do not overfill holes. The tree will
to dispose of or burn.die in 2 weeks.
#2 - Using Kosher salts